Grewal
Get a Free Quote
Shutter Repair fitted by Grewal Shopfront & Shutters

Shutter Repair in Bath

Shutter Repair for Bath premises, inside our regular working area.

What we do in Bath

Broken springs, burnt-out motors, bent laths and jammed guides are the usual reasons a Bath shutter will not open or close. We repair all the common makes, manual and electric.

Premises in Bathwick, City Centre, Combe Down and Larkhall are all within reach. Most repairs are finished in one visit, and you hear the price before work starts.

Bath is inside our regular working area, roughly within 100 miles of Birmingham, so we can survey, fit and come back for adjustments without long waits.

Shopping streets and planning in Bath

If you are taking on a listed shopfront in Bath, we recommend involving a heritage adviser early. We can work with them to make and fit what is approved.

The whole city is a World Heritage Site, and a very high share of its buildings are listed, especially in the Georgian centre around Milsom Street, Pulteney Bridge and the Circus. Bath and North East Somerset Council has detailed shopfront guidance, and changes almost always need listed building consent.

What you get from us

The same standard on every shutter repair job, whichever town it is in.

Fixed in one visit most times

Common springs, motors and laths travel with us, so most faults are sorted on the first trip.

Every brand, every age

Manual or motorised, new or decades old, we work on shutters from all the usual makers.

Springs handled safely

Spring tension is released and reset by trained engineers using the right tools, not a screwdriver and hope.

Price before we start

You hear what is wrong and what it will cost before any repair begins.

Parts of Bath on our list

Districts and streets people in Bath most often ask us about.

BathwickCity CentreCombe DownLarkhallMilsom StreetOldfield ParkPulteney BridgeSouthgateWestonWidcombe

Postcode districts: BA1 · BA2

From first call to finished job

The steps for a shutter repair job, in the order they happen.

1

Describe the fault

Tell us what the shutter is doing, or send a short video. It helps us bring the right parts.

2

Engineer inspects

We test the power, controls, motor, spring and curtain to find the cause.

3

Agree the price

You approve the repair price before we start work.

4

Repair and run

The fault is fixed and the shutter is run through full cycles to make sure it opens, closes and locks.

Shutter repair prices

Most repairs fall into a few common jobs. Typical prices for them are below.

New spring fitted£180 – £350
New motor fitted£400 – £800
One lath replaced£80 – £200
Guide rails straightened or reset£200 – £500

Prices are before VAT. We confirm the exact figure before any work begins.

Questions people ask about shutter repair

A shutter stuck open overnight is an emergency and we treat it as one. Other repairs are normally booked within a few working days.

Yes, all the time. Most shutter parts are standard, and we can source the rest.

Typically two to four hours on a shop shutter, depending on access and whether the barrel needs to come down.

If the barrel and most of the curtain are sound, repair it. If several major parts are worn out at once, replacement may be the better money. We will give you both prices.

Ask for a shutter repair price in Bath

Send a few details and a photo if you have one. We will come back to you with a ballpark figure and a survey date.

  • New fronts, shutters and doors
  • Repair visits booked in
  • Urgent job? Ring for an honest arrival time
  • Free survey and written price

We usually reply the same working day

Or call us directly: 07597 630000